Nowadays, with the continuous development of technology, the technology of bending machinery is also more and more, and the bending of pipe in China has been relatively large in recent years. It is mainly driven by auto parts work. Because the time is not long, technology accumulation, accumulation can not be, the growth cycle of technical employees can not be, and the actual technical personnel are relatively few. With the continuous development of work, the need for products is also constantly improving.

In order to maintain the efficiency and safety of cnc pipe end forming machines, there must be an effective cnc pipe end forming machines inspection and maintenance plan, and follow the regulations. The life of relays, solenoid valves or other electrical and mechanical parts shall be determined by the test method of use, environmental conditions and a complete and thorough preventive maintenance plan. Frequent inspections and a good preventive maintenance program can reduce the likelihood of errors. Parts that are worn out or beyond repair must be replaced immediately.

The bending action is automatic in the production of pipe bending, but its feeding, three-dimensional Angle, etc., can only rely on the fixed length and Angle positioning tape by manual completion. Hydraulic cnc pipe end forming machines are to break down the bending action, and respectively use hydraulic pressure to drive the clamping retreat, the bending retreat, the auxiliary inlet and the auxiliary retreat, the core retreat and so on. Electric cnc pipe end forming machines are purely electric, driven by a motor, a transmission, and a gear chain.

The memory can store 16 sets of files, each speed can set 16 bending angles, error messages will be displayed on the screen to help the operator immediately eliminate. cnc pipe end forming machines use touch screen and cnc module, dialogue operation, simple and easy program setting, and for the coordinate conversion of cnc pipe end forming machines processing value, software can be installed in the desktop computer editing calculation.

When the machine is found to be abnormal, stop and check immediately. When placing the long material pipe into the material rack and untying the lead wire, measures should be taken to prevent the pipe from rolling, impacting and pressing. It is necessary to check that the dust removal device should be in good condition before bending. After the work of cnc pipe end forming machines, cut off the power supply and do a good job of cleaning and lubrication.

cnc pipe end forming machines https://www.john-sheng.com/CNC-Tube-End-forming